Tandem Press Brake
The tandem system facilitates the concurrent or independent operation of two machines, commonly employed in the manufacture of large workpieces such as light poles, communication and power towers, and construction machinery. In comparison to large individual machines, it offers simpler installation and faster production times, rendering it a superior option for companies with output value demands.
● Model: 2-WC67K
● Controller Brand: DELEM, CYBELEC, ESA
● Capabilities: 120T – 1600T
CNC Controller
● "Hot-key” touch navigation
● 10.1" high resolution colour TFT
● Up to 4 axes (Y1, Y2 + 2 aux. axes)
● Tool / material / product library
● Servo and frequency inverter control
● Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
● TandemLink (option)
● USB memory stick interfacing
● Profile-T offline software
Stress Analysis & Finite Element Analysis
The CAE software SOLIDWORKS used as the method to analyze the linear static construction, stress and deformation for press break and laser cutting machine frames. So for complicated structures, highly complex loading’s, transient modelling and combination of the above, FEA makes sense.
Hydraulic Valve
The German Rexroth fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation.
Advantage:
● The frequency response (response frequency) is higher and can be as high as 200Hz.
● It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes.
● Closed-loop control, signal feedback.
● Original German imported products, longer service life.
CNC Backgauge
● BGA-4 BackGauge
● Ball screws and linear guide on X, R-axis
● Precision belts and YYC rack on axes Z1‐Z2.
● Fingers with double stop and micrometric adjustment.
● Mechanical accuracy ± 0.03 mm.
● Axes Z1‐Z2 speed 1000 mm/s.
● Axis X speed 500 mm/s.
● Load capacity – 30 kg per support.
Main motor
As is widely recognized, servo motors have emerged as the dominant technology, aimed at achieving high dynamics and improving machine production efficiency with low energy consumption. Compared to traditional motors, the adoption of servo motors can lead to energy savings of up to 35%, thereby providing customers with the benefits of increased efficiency and reduced operating costs.
We offer an efficient and energy-saving motor from Siemens, Germany, which meets the daily production needs of our customers. This motor is significantly more efficient than standard motors, resulting in increased work efficiency.
Electrical Parts
The equipment employs authentic Schneider components imported from France, renowned for their stability, durability, and extended service life.
The machine is outfitted with an original Estun adaptive electrical box assembly, which boasts robust anti-interference capabilities and consistent electrical performance.
Crowning system
Manual and CNC crowning ensures a constant bend angle across the full length of the machine. This is achieved by preloading the machine, to offset any possible deflection under load or compensate for any tool wear, so that under load contacting surfaces are parallel to each other.
Italy DSP Laser Protection (Optional)
DSP® laser protection will be necessary if you have a high requirement for the safety.
Advantage:
● Laser protection, Multi beam Receiver
● Pretective areas, Front, center and rear
● The safety level is CAT.4 and SIL3
● Detection Case protection degree: IP 65
● Laser classification: class 1 M
● Response time: 5 ms
● Change Speed Point : 5mm + Stopping Space
● The maximum protective distance is up to 15M
● LED indicators show various states
Manual Upper Tool Clamping
The CNC Press Brake Machine use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed, are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.
Advantage:
● Safe and fast tool change
● Can be used without modifying Europe type punches
● Front clamp – vertical tool change
● Rear clamp – horizontal tool change
Punches & Dies
CNC Press Brake punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate toolings according to different bending requirements of customers.
